Smita Hardware Store

Knurling washer are manufactured as per DIN 9250. They are manufactured in spring steel material. They have knurling / serrations on both the sides. Size available from M3 to M24.

Contact Washer comes as Conical washer with teeth on one side. They are made of high carbon steel and hardened and plated.

Product Details:
Material: Carbon Spring Steel / EN42J / C67S
Size Range: Dia 3mm to 24mm
Application: It is used for a quick, permanent and secure assembly over plain shaft of soft steel, non ferrous metals, plastics, etc. Used for automotive seat assemblies, securing car logos, securing threaded studs and many more.Used in replacement of eclips, cotter pins, and even nut for many purpose. 
Availability:  Ready Stock

Wedge Lock Washers as per DIn25201

Conical Disc Washer as DIN2093. Material: Carbon Spring Steel, Hardened

Quick-lock washer also called as push lock washer are used for the easy locking purpose which can replace cotter pins, eclips and nuts. Push lock washer have more strength then other option.

Quick-lock washer also called as push lock washer are used for the easy lockiing purpose which can replace cotter pins, eclips and nuts. Push lock washer have more strength then other option.

Star lock is used for quick, permanent and secure locking purpose in soft material, plastic material, bolts, metal rods.

Serrated lock washers have serrations along the outside diameter that prevent loosening and increase the washers locking power. Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress.
They are manufactured as per DIN 6797

Bearing wave washer are used over bearing whike assembly. it is also called as pre-loading washer. They are made of spring steel material. It has waves (no. of waves depend upon sizes) to create spring effect. 

We are leading firm in the industry engaged in delivering best quality Spring Disc Washer.
Product Details:
High pressure resistance
Strong design
Corrosion proof
Proper fitting
Damage-resistant
Easy to install

Bearing wave washer

1.      BEARING WAVE WASHER

Standard: DIN 137

Material : Spring Steel 

Size Range: 6000 series, 6200 series and 6300 series

Application: For pre-loading bearings in electric motors. The waved washer is installed in the bearing housing and works by maintaining a force on the outer face of the ball bearing, ensuring smooth and quiet running, which results in extended life.

Availability: Ready in Stock

Standard: DIN 2093
Material: Spring Steel and Stainless Steel
Size Range: ID 3mm to ID 57mm
Application: A Conical disc spring washer also as called a "Belleville washer" consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage of a disc spring is that it generates high force in a very short spring length and with minimal movement when compressed.
We are the importers and stockist of Conical Washer. We have the Dongbo brand conical washer
Availability: Ready in Stock

Product Details:

• Material: Carbon Spring Steel
• Size Range: 2mm to 20mm
• Application: It is used for a quick, permanent and secure assembly over plain shaft of soft steel, non ferrous metals, plastics, etc. Used for automotive seat assemblies, securing car logos, securing threaded studs and many more.

Conical Contact Washers. These are available in Carbon Steel. The knurled ring effectively prevents the bolt getting loose. The spring force generated by the washer during tightening allows for compensation of clearence of the assembled parts, maintaining the bolts tightening force

Product Details:
Material: Carbon Spring Steel
Size Range: 2mm to 20mm
Application: It is used for a quick, permanent and secure assembly over plain shaft of soft steel, non ferrous metals, plastics, etc. Used for automotive seat assemblies, securing car logos, securing threaded studs and many more.

Product Details:
Material: Carbon Spring Steel and Stainless Steel
Size Range: 2mm to 20mm
Application: It is used for a quick, permanent and secure assembly over plain shaft of soft steel, non ferrous metals, plastics, etc. Used for automotive seat assemblies, securing car logos, securing threaded studs and many more.

• Standard: DIN 6797
• Material: Spring Steel
• Size Range: 3mm to 25mm
• Application: This product is used in fitting two or more components together and is used at various engineering application.

Product Details:

Standard: DIN 2093

Material: Spring Steel

Application: A disc spring also called as a "Belleville Washer" consists primarily of a convex disc supported at the outer periphery by one force and an opposing force of the disc. Disc springs are used singly, or in a stacks, to achieve a desired load and travel. The advantage of a disc spring is that it generates high force in a very short spring length and with minimal movement when compressed.

• Standard: DIN 6798
• Material : Stainless Steel
• Size Range: M3mm to M25mm
• Application: It is used for numerous application in the engineering field

• Standard: DIN 6797
• Size Range: 3mm to 25mm
• Availability: Ready in Stock

• Standard: DIN 6798
• Material: Spring Steel
• Size Range: M3mm to M25mm
• Application: It is used for numerous application in the engineering field.

Our firm is amongst the trusted organizations engaged in offering top quality Bearing Wave Washer.
Product Details:
Optimum strength
Flexible in nature
Light weight
Available in different sizes
Rust resistance
Affordable
Product Details:
Standard: DIN 137
Material : Spring Steel
Size Range: 6000 series, 6200 series and 6300 series
Application: For bearings in electric motors. The waved washer is installed in the bearing housing and works by maintaining a force on the outer face of the ball bearing, ensuring smooth and quiet running, which results in extended life.

Product Details:

• High strength
• Precise dimensions
• Rust-proof
• Damage-resistance
• Hassle free installation
• Available in different sizes

• Material: Carbon Spring Steel
• Size Range: Varied Range
• Application: Contact Washers find application in switchboard and switch gear panels. These spring steel washers are dimensionally accurate and are known for their durability. Top surface of these washers come with serrations that precludes loosening of screw once tightened. During tightening, the 6 teeth on the bottom penetrates into the base metal to provide earthing.

A Belleville washer, also known as a coned-disc spring, conical spring washer, disc spring, Belleville spring or cupped spring washer, is a conical shell which can be loaded along its axis either statically or dynamically. A Belleville washer is a type of spring shaped like a washer.

Knurling Washer is manufactured as per DIN 9250. This is made in High Carbon steel like En42J, 65Mn and Stainless steel 304 material. The size available from M3 to M36