Smita Hardware Store

Product Details:

Standard: DIN 471 DIN 472 DIN 6799 DIN 7993

Material : Spring Steel and Stainless Steel 304

Size Range: Varied Range

Application: This Circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. They are either fitted through bores or over the shaft grooves. Lugs with holes are provided for rapid fitting or removal with circlip pliers.

Availability: Ready in Stock

Smitta Hardware are the direct importers and Stockist of Circlips. the raw material use to manufacture Circlips are C67S, EN 42, AISI420, SS304. Circlips are packed in shrink roll packing to avoid moisture contact and corrosion.

Material : S.S. 304
Size Range: 4mm to 300 mm
Application: Used over the shaft. This form of circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Availability: Ready in Stock

Standard: DIN 472 IS 3075
Material : S.S. 304
Size Range: 8mm to 300 mm
Application: The most common form of axially fitted circlips for bores with grooves. The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
 
Availability: Ready in Stock

Stainless Steel 304 Circlip / Retaining Ring
Product Details:
Standard: DIN 471 DIN 472 DIN 6799 DIN 7993
Material : Stainless Steel 304
Size Range: 4mm to 300mm
Application: This Circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. They are either fitted through bores or over the shaft grooves. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Availability: Ready in Stock

Circlips is type of fastener or retaining ring is placed into machined groove on a shaft or in a bore to prevent lateral movement but permits rotational movement. It is used in various engineering industries during assembly of machine parts.
Circlips are available in Carbon Spring Steel Material and Stainless Steel Material. AISI420 is one of the best grade use of Stainless steel material with its high strength feature along with non-corrosive features. In Spring Steel C67S grade is best suitable for Circlips.
Circlips are available in wide range, ranging from 3mm to 300mm and even above as per drawings. Circlips are manufactured as per DIN471 and DIN472 standards.

We are one of the leading firms in the industry offering large variety of Metal Circlip.

Product Details:

Sturdy structure

Resistant to temperature fluctuation

Long service life

Easy installation

Corrosion resistance

Dimensional accuracy

Product Details:

Standard: DIN 471 DIN 472 DIN 6799 DIN 7993

Material : Spring Steel and Stainless Steel 304

Size Range: Varied Range

Application: This Circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. They are either fitted through bores or over the shaft grooves. Lugs with holes are provided for rapid fitting or removal with circlip pliers.

Availability: Ready in Stock

Backed with years of expertise we are offering large collection of Internal Circlip in the market.
 
Product Details:

Compact design

Strong design

Simple installation

Easy to use

Anti-corrosive

Smooth finish

Product Details:

Standard: DIN 472 IS 3075

Material : Spring Steel

Size Range: 8mm to 300 mm

Application: The most common form of axially fitted circlips for bores with grooves. The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers.

1.      STAINLESS STEEL 304 EXTERNAL CIRCLIPS
Standard: DIN 471 IS 3075
Material : S.S. 304
Size Range: 4mm to 300 mm
Application: Used over the shaft. This form of circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Availability: Ready in Stock

Circlips importers. Circlip manufacture as per DIN 471 and DIN 472. External Circlips as per DIN471 and Internal Cirlcips as per DIN472. We have SS304 Circlips, SS420 Circlips, AISI420 Circlips, Spring Steel Circlips, EN42J Circlips, C67S Circlips.

Application: Used over the shaft and bore. This form of circlip often used in assemblies subjected to centrifugal forces and also secure against high rotational speed. Lugs with the holes are provided for rapid fitting or removal with the help of circlip pliers.

Application: The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. This range can be supplied stacked on rods for use with applicators and dispensers for rapid installation, thus resulting in sharply reduced assembly costs. 

Smitta Hardware is the leading Importer, Manufacturer, Stockist and Whole-seller of Circlips, SS Cirlcips, Eclips, Dowel Pins, Star lock Washer, Wave washer, Bearing Washer, Parallel keys, and other Industrial Fasteners.

Product Details:
Standard: DIN 471 DIN 472 DIN 6799 DIN 7993
Material : Spring Steel / SS 304 / SS 202 / AISI420
Size Range: 4mm TO 300mm
Application: This Circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. They are either fitted through bores or over the shaft grooves. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Availability: Ready in Stock

Imported Circlips / Retaining Rings
Product Details:
Standard: DIN 471 DIN 472 DIN 6799 DIN 7993
Material : Stainless Steel 304 / 202 / AISI420
Size Range: 4mm to 300mm
Application: This Circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. They are either fitted through bores or over the shaft grooves. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Availability: Ready Stock

Metric internal circlip sizes and dimensions are according to DIN 472 standard.  the material use to manufacture circlips is C67S, EN42, Stainless Steel. Internal circlips are retaining rings for securing mechanical elements (e.g. bearings) in bores. Circlips are installed into a groove and creating a shoulder that retains the assembly. Lugs with holes are provided for easy fitting and removal with circlips pliers.

External Circlips as per DIN 471. Available in complete range in stainless steel and spring steel material.

Application: The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. This range can be supplied stacked on rods for use with applicators and dispensers for rapid installation, thus resulting in sharply reduced assembly costs.
Availability: Ready in Stock
 

We are the importer and Stockist of SS304 Circlips. The circlips are manufactured as per DIN 471, DIN 472.

External circlips are retaining rings for holding structural parts (e.g. rolling bearings) on shafts. Circlips are fitted with spring retention in grooves and are suitable for the transmission of axial forces.

Stainless Steel 304 Circlip / Retaining Ring
Product Details:
Standard: DIN 471 DIN 472 DIN 6799 DIN 7993
Material : Stainless Steel 304
Size Range: 4mm to 300mm
Application: This Circlip often used in assemblies subjected to strong centrifugal forces, is also secure against high rotational speeds. They are either fitted through bores or over the shaft grooves. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Availability: Ready in Stock

Application: The most common radially fitted circlips for shafts with grooves. Provides a large shoulder on a relative small shaft diameter. this range can be supplied stacked on rods for the use of applicators and dispenser for rapid installation, thus resulting in sharply reduced assembly costs.

Eclips manufactured as per DIN 6799. Available in Stainless Steel and Spring Steel. Size range from 1.5mm eclip to 24mm eclips.